Inspection, Servicing, Repairs & Testing

LOLER thorough examinations, servicing, repairs and proof load testing for lifting and fall protection equipment, from our depots across the UK.

  • LEEA

    Full MemberAudited against LEEA technical requirements

  • ISO 9001

    Quality certifiedHead Office and Hire & Repair Centre

  • 7

    UK depotsContact your local team directly

Safety Liftin Gear engineer inspecting a chain block in the workshop

What we do

Four core services to keep your equipment safe in use and your records up to date.

Thorough examination & inspection

LOLER thorough examinations and PUWER inspections, recording each item's condition and any defects found.

You receiveA written report for each item

Servicing & maintenance

Planned servicing of hoists, winches and lifting machines in line with manufacturer guidance, to reduce wear and unplanned downtime.

Also availableGas detector calibration, as a specialist service. Ask your nearest depot.

Repairs

Repairs to lifting equipment and fall protection equipment such as fall arrest blocks.

If an item can't be safely repairedWe'll explain why and quote for a replacement

Proof load testing & certification

Proof load testing after repair or modification, or where the examiner specifies it.

You receiveA test certificate for your records

Equipment we work on

Typical equipment our depot teams examine, service, repair and test.

  • Two-leg chain slings

    Lifting accessories

    • Chain and wire rope slings
    • Webbing and round slings
    • Shackles and eyebolts
    • Lifting clamps and beams
  • Manual chain blocks

    Hoists & lifting machines

    • Chain blocks
    • Lever hoists
    • Electric chain hoists
    • Winches and beam trolleys
  • Fall arrest block and full body harness

    Fall protection

    • Full body harnesses
    • Lanyards
    • Fall arrest blocks
    • Rescue and recovery equipment
  • Hand pallet truck

    Materials handling

    • Pallet trucks
    • Hydraulic jacks
    • Load moving skates
    • Platform trolleys

The services each item needs depend on the equipment type and how it is used. Your depot will confirm what applies.

When is a thorough examination due?

Unless a competent person has drawn up an examination scheme setting other intervals, LOLER requires a thorough examination at least every 6 or 12 months.

A thorough examination is also needed after installation where safety depends on how the equipment is installed, and after exceptional circumstances that could affect safety, such as damage or failure. Source: HSE guidance on thorough examinations.

6months

  • Lifting accessories, such as slings, shackles and eyebolts
  • Lifting equipment and accessories used to lift people

12months

  • All other lifting equipment, such as hoists and winches

Arrange an inspection, service or repair

Call or email your nearest depot, listed below. If you're not sure which depot to contact, our Bristol head office will direct you to the right team.

Include in your enquiry

  • Equipment type and quantity
  • Where the equipment is located
  • When you need the work done, or when examination is due
  • Any asset list or previous examination reports

Depot contacts

Maps and opening details are on each depot's location page.

South West & Wales

  • BristolHead Office

    Unit R1D Rockingham Gate, Poplar Way West, Cabot Park, Bristol BS11 0YW

    0117 938 1600EmailMap

  • BristolHire & Repair Centre

    Unit 23 Atlantic Road, Avonbridge Trading Estate, Avonmouth, Bristol BS11 9QD

    0117 938 1600EmailMap

  • Cardiff

    Unit S6 Capital Business Park, Parkway, Cardiff CF3 2PU

    029 2048 6404EmailMap

London & the South

  • London East

    Unit 14 Acorn Industrial Park, Crayford Road, London DA1 4AL

    01322 550666EmailMap

  • London WestTrade Counter: Unit 6
    Service Centre: Unit 16

    Liddall Way, Horton Road, West Drayton UB7 8PG

    01895 431089EmailMap

  • Southampton

    Unit 4 Southampton Trade Park, Third Avenue, Millbrook, Southampton SO15 0AD

    023 8077 9538EmailMap

North & Scotland

Frequently asked questions

Common questions about LOLER examinations and testing.

What is a LOLER thorough examination?

A systematic, detailed examination of lifting equipment and its safety-critical parts by a competent person, at set intervals. The examiner then completes a written report recording the examination date, when the next one is due and any defects found.

What is the difference between LOLER and PUWER?

LOLER applies specifically to lifting equipment and lifting operations. PUWER applies to all work equipment, including lifting equipment, and requires it to be suitable, maintained and inspected. Most lifting equipment is covered by both.

Does a thorough examination include a load test?

Not always. The competent person decides what each examination involves. It may include visual and functional checks, measuring wear and, where needed, load testing or non-destructive testing. Proof load testing is commonly carried out after a repair or modification.

What happens if a defect is found?

The defect is recorded in the report, with what is needed to put it right. Equipment with a dangerous defect should not be used until it is fixed. Where there is an existing or imminent risk of serious injury, the examiner must also send a copy of the report to the enforcing authority.

How long should I keep examination reports?

Keep reports of thorough examination available for at least two years, or until the next report, whichever is longer. They can be stored electronically, as long as you can produce a written copy if needed.

Call Now