A window manufacturer and installer has been fined £36,000 after their workers were seen installing a window without any safety precautions, 8 metres above a busy west end street.

Westminster’s magistrates court head that the company carried out window installation work, which put their workers and members of the public at risk of serious injuries or fatalities.

A member of the public provided photos of the workers leading out of a window 8 metres above the street, they also provided a video, filmed on their phone, of the workers accidentally dropping a part of the window which fell to the ground narrowly missing a pedestrian.

The health and safety executive investigation found that the company failed to provide basic safety equipment, including scaffolding – which would have prevented the workers and the window from falling. On top of not providing the essential safety equipment, health and safety executive also found that the workers had not received any formal training, and there was no supervisor present.

It was also found that no risk assessment had been conducted, and the company had failed to invest in the correct safety equipment needed for when people are working at height.

Andrew Verrall – Withers, an HSE Inspector said – “The Company’s standards were appalling, and this was particularly unacceptable as previous warnings had been blatantly disregarded.”

In this day and age, there is no excuse to not take the relevant safety precautions when you are carrying out dangerous work.

Working at height is extremely dangerous so it is incredibly important to adhere to the working at height regulations and take the correct safety precautions at all times. These laws are in place to help protect workers, and the general public. In this case, if the pedestrian was under the window at the wrong time, there could have been a fatal accident.

If you have been asked to work at height make sure you have all the correct equipment for the task ahead. Remember to inspect your equipment for damage before use. If you equipment is damaged in any way, do not carry out the work until you have sourced a replacement, or had it repaired.

Here at SafetyLiftinGear we have a whole department dedicated to height safety. Here you will find a variety of specialist safety harnesses, fall arrest blocks, lanyards, safety lines, rope access equipment, anchors and more.

If you are looking for a specific item but cannot locate it on our website, you can contact us by telephoning 0800 123 69 69 or emailing sales@safetyliftingear.com and a member of our team will be more than happy to assist you. 

A construction firm has been fined after a worker fell 2.5m head first and sustained serious injuries. The hearing at Taunton Magistrates Court revealed that the employee was working at height on a construction site, when the formwork panels he was installing “gave way” and he fell head first over a ledge.

An investigation conducted by the Health and Safety Executive found that there had been a lack of planning for the height work, and the construction firm were using an unsafe method of installing the formwork.

The company was fined £13,000 and ordered to pay cost of £3,742.18 after pleading guilty to failing to comply with the Work at height regulations 2005.

Working at Height

Working at height is dangerous work. The law requires anybody who is planning to work at height, be it employers or the self-employed organise a plan so that the work is carried out in a safe manner.

If you can avoid working at height, do! It is important not to put yourself, or others in a working situation that they could injure themselves unless it’s unavoidable or absolutely necessary. Conduct the appropriate risk assessments, and make sure all your staff are fully trained, and briefed on the safety precautions. 

If you find yourself having to work at height, make sure you are protecting yourself from potential injury at all costs. Over 60% of fatalities during working at height are a result of falls, either from ladders, scaffolding, platforms, roof edges, and fragile roofs make sure you are using Fall Arrest Block, safety harnesses, Lanyards, safety lines and roof anchors as required. If you do not have access to this equipment do not undergo the work.

Before undergoing any height work make sure that all the equipment that you will be using has been inspected thoroughly for any damage. If you do come across any damage do not use, and postpone any work at height until the equipment has been replaced. 

A construction firm has been fined after a worker fell 2.5m head first and sustained serious injuries. The hearing at Taunton Magistrates Court revealed that the employee was working at height on a construction site, when the formwork panels he was installing “gave way” and he fell head first over a ledge.

An investigation conducted by the Health and Safety Executive found that there had been a lack of planning for the height work, and the construction firm were using an unsafe method of installing the formwork.

The company was fined £13,000 and ordered to pay cost of £3,742.18 after pleading guilty to failing to comply with the Work at height regulations 2005.

Working at Height

Working at height is dangerous work. The law requires anybody who is planning to work at height, be it employers or the self-employed organise a plan so that the work is carried out in a safe manner.

If you can avoid working at height, do! It is important not to put yourself, or others in a working situation that they could injure themselves unless it’s unavoidable or absolutely necessary. Conduct the appropriate risk assessments, and make sure all your staff are fully trained, and briefed on the safety precautions. 

If you find yourself having to work at height, make sure you are protecting yourself from potential injury at all costs. Over 60% of fatalities during working at height are a result of falls, either from ladders, scaffolding, platforms, roof edges, and fragile roofs make sure you are using Fall Arrest Block, safety harnesses, Lanyards, safety lines and roof anchors as required. If you do not have access to this equipment do not undergo the work.

Before undergoing any height work make sure that all the equipment that you will be using has been inspected thoroughly for any damage. If you do come across any damage do not use, and postpone any work at height until the equipment has been replaced.