Tag: ratchet-straps

18 Feb 2016

SafetyLiftinGear’s Guide to Ratchet Lashings

admin Products

If you have been asked to transport good, especially heavy goods, you must use the correct load restraints before starting your journey. Using load restraint equipment such as cam buckles and ratchet straps prevents your load from coming loose in transit. Failure to secure your load in the correct manner could result in damaged goods, as well as injuries and possibly fatalities if your unsecured load causes an accident.

If you are transporting your load across continents or simply just moving a loaded pallet by fork lift in a warehouse, regardless of the distance you intend on travelling, ratchet lashings must be used.

It is important to note that, just with any other equipment that is used to transport loads, ratchet straps have their own Working Load Limit (WLL) and their own Minimum Breaking Strength. The break strength is the amounts of weight a ratchet lashing can withstand without breaking. The breaking strength of each component of a ratchet lashing is independently test. But like everything, the ratchet lashing is only as strong as its weakest point, so the part of the ratchet lashing that is the weakest is considered to be the break strength of the entire lashing.

From the Minimum breaking point, the working load limit can be calculated by taking 1/3 off the break strength. So this means that the ratchet lashing with break strength of 300kg has a Working Load Limit of 1000kg.

Remember to check the working load limit of your ratchet lashing before use, to make sure they are able to withstand your load.

How to use ratchet lashings

When you receive your ratchet straps they will require some basic assembly. This can get quite confusing, so we have provided a simple 5 step guide to make sure you have assembled them correctly.

Open the ratchet handle, and feed the webbing though the ratchet handle – from the bottom
Feed the webbing over the top of your ratchet handle
Fasten the hooks to the tie down points.
Pull the webbing taught, removing any slack, to the tension you require.
Pump ratchet until your load is secure

Remember to tie off any access webbing, and to check that your load is completely restrained and secure before commencing your journey

How to maintain Ratchet Lashings

Over time, with excessive use or negligence, your ratchet straps will wear down, and eventually become unusable. However, if you look after you ratchet straps correctly, they can last a very long time.

To maintain good working order of your ratchet straps, we at SafetyLiftinGear recommend;

Before you using any ratchet strap or cam buckle make sure they have been inspected. If there are any signs of damage, do not use.
Keep your straps out of direct sunlight when in storage. Sunlight can cause polyester straps to become brittle and can lead to the straps losing their strength and breaking whilst in use.
Store ratchet lashings in a dry place. If your lashings get wet, make sure you dry them off completely before storage to prevent mildew and mould.

Here, at SafetyLiftinGear we supply a large variety of Ratchet Lashings, specifically designed to help you transport a variety of loads, and attach to various tie down points. Below are some of our best selling Ratchet Lashings:

Ratchet Lashing with Open Rave Hooks

Rave hooks ratchet lashings are widely used for attaching loads to commercial vehicles or trailers because of their ease of application. This product is available in 3 lengths (6 mtr, 8 mtr and 10 mtr) and has a minimum breaking strength (MBS) of 5 tonnes.This ratchet lashing is trusted by many UK transport companies as it is strong, reliable, shock absorbent and extremely hard wearing.

Click here for more information about this product.

Ratchet Lashing with Chassis Hooks

Closed rave hooks (chassis hooks) are a face and effective way of restraining your load to your commercial vehicle, flatbed lorry or truck. Again, these types of ratchet straps are extremely popular with many UK transport companies because of their ease of application. Simply hook the ratchet lashing to your truck or lorry directly for secure transit.

Here at SafetyLiftinGear, we have a range of ratchet lashings with chassis hooks available, all with different working load limits and different lengths.

Click here to view our full range of Ratchet Lashings with chassis hooks.

Endless Ratchet Lashing

The endless ratchet lashing is a lashing that has no hooks or fixing points. If you are required to secure a load to pallets, racking or you want to secure items together that do not need to be secured down, then an endless ratchet strap is the perfect choice.

These lashings are available in various lengths and Minimal Breaking strengths.

Click here to browse our range.

Please ensure that you have selected the appropriate ratchet lashing for the intended job. If you have any questions regarding our range of lashings, then please contact us.

18 Feb 2016

SafetyLiftinGear’s Guide to Ratchet Lashings

admin Products

If you have been asked to transport goods, especially heavy goods, you must use the correct load restraints before starting your journey. Using load restraint equipment such as cam buckles and ratchet straps prevents your load from coming loose in transit. Failure to secure your load in the correct manner could result in damaged goods, as well as injuries and possibly fatalities if your unsecured load causes an accident.

If you are transporting your load across continents or simply just moving a loaded pallet by fork lift in a warehouse, regardless of the distance you intend on travelling, ratchet lashings must be used.

It is important to note that, just with any other equipment that is used to transport loads, ratchet straps have their own Working Load Limit (WLL) and their own Minimum Breaking Strength. The break strength is the amounts of weight a ratchet lashing can withstand without breaking. The breaking strength of each component of a ratchet lashing is independently test. But like everything, the ratchet lashing is only as strong as its weakest point, so the part of the ratchet lashing that is the weakest is considered to be the break strength of the entire lashing.

From the Minimum breaking point, the working load limit can be calculated by taking 1/3 off the break strength. So this means that the ratchet lashing with break strength of 300kg has a Working Load Limit of 1000kg.

Remember to check the working load limit of your ratchet lashing before use, to make sure they are able to withstand your load.

How to use ratchet lashings

When you receive your ratchet straps they will require some basic assembly. This can get quite confusing, so we have provided a simple 5 step guide to make sure you have assembled them correctly.

Open the ratchet handle, and feed the webbing though the ratchet handle – from the bottom
Feed the webbing over the top of your ratchet handle
Fasten the hooks to the tie down points.
Pull the webbing taught, removing any slack, to the tension you require.
Pump ratchet until your load is secure

Remember to tie off any excess webbing, and to check that your load is completely restrained and secure before commencing your journey

How to maintain ratchet lashings

Over time, with excessive use or negligence, your ratchet straps will wear down, and eventually become unusable. However, if you look after you ratchet straps correctly, they can last a very long time.

To maintain good working order of your ratchet straps, we at SafetyLiftinGear recommend;

Before you using any ratchet strap or cam buckle make sure they have been inspected. If there are any signs of damage, do not use.
Keep your straps out of direct sunlight when in storage. Sunlight can cause polyester straps to become brittle and can lead to the straps losing their strength and breaking whilst in use.
Store ratchet lashings in a dry place. If your lashings get wet, make sure you dry them off completely before storage to prevent mildew and mould.

Here, at SafetyLiftinGear we supply a large variety of Ratchet Lashings, specifically designed to help you transport a variety of loads, and attach to various tie down points. Below are some of our best selling Ratchet Lashings:

Ratchet Lashing with Open Rave Hooks

Rave hooks ratchet lashings are widely used for attaching loads to commercial vehicles or trailers because of their ease of application. This product is available in 3 lengths (6 mtr, 8 mtr and 10 mtr) and has a minimum breaking strength (MBS) of 5 tonnes.This ratchet lashing is trusted by many UK transport companies as it is strong, reliable, shock absorbent and extremely hard wearing.

More Information About this Product >

Ratchet Lashing with Chassis Hooks

Closed rave hooks (chassis hooks) are a face and effective way of restraining your load to your commercial vehicle, flatbed lorry or truck. Again, these types of ratchet straps are extremely popular with many UK transport companies because of their ease of application. Simply hook the ratchet lashing to your truck or lorry directly for secure transit.

Here at SafetyLiftinGear, we have a range of ratchet lashings with chassis hooks available, all with different working load limits and different lengths.

Full Range of Ratchet Lashings with Chassis Hooks >

Endless Ratchet Lashing

The endless ratchet lashing is a lashing that has no hooks or fixing points. If you are required to secure a load to pallets, racking or you want to secure items together that do not need to be secured down, then an endless ratchet strap is the perfect choice.

These lashings are available in various lengths and Minimal Breaking strengths.

Browse Our Range >

Please ensure that you have selected the appropriate ratchet lashing for the intended job. If you have any questions regarding our range of lashings, then please contact us.

10 Sep 2015

When Load Restraint Goes Wrong

mike Health & Safety

Before you hit the road, you should always use the appropriate load restraint equipment to ensure that whatever you're carrying stays put for the duration of the journey. This is particularly important for heavy loads, of course, but it applies to loads of all sizes over journeys of any length. Whether you're hauling a tonne of bricks from Land's End to John O'Groats or simply forklifting a few pallets to the other end of the warehouse, securing the load should always be your top priority.

Otherwise, you might end up like the motorists in these videos...

1. Shelves come loose from trailer

Everything seems fine in the first 15 seconds of this video...but then the flimsy length of tape that was barely keeping those shelves on the trailer broke, and it all went rather wrong. Again, kudos to the motorist who filmed this - not everyone would be able to get out of harm's way that quickly!

2. Boxes take a high-speed tumble

The text at the start of this video tells us that the camera's owner was doing 100 kph (roughly 62mph) when their fellow motorist lost their load, and this really illustrates the importance of using the right load restraint equipment. If your car hits something at more than 60mph, it doesn't really matter what that something is - it's going to do a lot of damage!

3. Mattresses go flying

We're not entirely sure how those two mattresses ended up in mid-air, but we're almost certain it could have been prevented if the owner had strapped them down properly!

4. Huge crate slides off lorry

Okay, now we're just lost for words. Do these people not think to secure their loads at all? Do they think that everything will just magically stay put?

If you don't want your load to end up on YouTube, make sure you secure it with the correct load restraint equipment. It will prevent damage and - more importantly - save lives!

10 Sep 2015

When Load Restraint Goes Wrong

mike Health & Safety

Before you hit the road, you should always use the appropriate load restraint equipment to ensure that whatever you're carrying stays put for the duration of the journey. This is particularly important for heavy loads, of course, but it applies to loads of all sizes over journeys of any length. Whether you're hauling a tonne of bricks from Land's End to John O'Groats or simply forklifting a few pallets to the other end of the warehouse, securing the load should always be your top priority.

Otherwise, you might end up like the motorists in these videos...

1. Shelves come loose from trailer

Everything seems fine in the first 15 seconds of this video...but then the flimsy length of tape that was barely keeping those shelves on the trailer broke, and it all went rather wrong. Again, kudos to the motorist who filmed this - not everyone would be able to get out of harm's way that quickly!

2. Boxes take a high-speed tumble

The text at the start of this video tells us that the camera's owner was doing 100 kph (roughly 62mph) when their fellow motorist lost their load, and this really illustrates the importance of using the right load restraint equipment. If your car hits something at more than 60mph, it doesn't really matter what that something is - it's going to do a lot of damage!

3. Mattresses go flying

We're not entirely sure how those two mattresses ended up in mid-air, but we're almost certain it could have been prevented if the owner had strapped them down properly!

4. Huge crate slides off lorry

Okay, now we're just lost for words. Do these people not think to secure their loads at all? Do they think that everything will just magically stay put?

If you don't want your load to end up on YouTube, make sure you secure it with the correct load restraint equipment. It will prevent damage and - more importantly - save lives!

25 Aug 2015

Product Focus: Ratchet Lashing Straps

mike Products

SafetyLiftinGear's ratchet lashing straps are widely used by numerous transport companies in the UK and beyond. Rest assured that, if you're transporting a heavy load and you want to make sure it stays put, we can provide the perfect solution.

Why are ratchet straps so important?

Because failure to restrain the load(s) you're transporting can have grave consequences. We've seen many photos of heavy loads that came loose in transit because weren't properly restrained; this results in damaged goods and, worse still, road accidents. According to gov.uk, unrestrained objects falling from vehicles caused a total of 22,000 road impact incidents in Britain over the course of 2013.

Simply put, our ratchet lashing straps help to protect your cargo and minimise the likelihood of an accident while you're on the road. They're an extremely important safety consideration!

What ratchet straps do SafetyLiftinGear offer?

Our Load Restraint department is home to more than a dozen different ratchet lashing products, all of which are fully tested and certified before sale. Some of these products are supplied with claw hooks, rave hooks or chassis hooks; others are endless. All are made of high-strength polyester webbing, ensuring superb performance across the board.

It's important to always heed the MBS (Minimum Breaking Strength) of the ratchet straps you purchase - this figure represents the weight capacity of the strap, and should not be exceeded under any circumstances. The MBS of our ratchet lashing straps ranges from 500kg to 10 tonnes.

Do SafetyLiftinGear sell any accessories for my ratchet lashing straps?

Yes - we provide wear sleeves and corner protectors to help you protect your ratchet straps and extend their lifespan.

How do I use a SafetyLiftinGear ratchet strap?

Our ratchet lashing straps are very easy to use, as this video demonstrates:

Click here to see our full range of ratchet lashing straps, or give us a call on 0808 123 69 69 for more information on any of our products.

25 Aug 2015

Product Focus: Ratchet Lashing Straps

mike Products

SafetyLiftinGear's ratchet lashing straps are widely used by numerous transport companies in the UK and beyond. Rest assured that, if you're transporting a heavy load and you want to make sure it stays put, we can provide the perfect solution.

Why are ratchet straps so important?

Because failure to restrain the load(s) you're transporting can have grave consequences. We've seen many photos of heavy loads that came loose in transit because weren't properly restrained; this results in damaged goods and, worse still, road accidents. According to gov.uk, unrestrained objects falling from vehicles caused a total of 22,000 road impact incidents in Britain over the course of 2013.

Simply put, our ratchet lashing straps help to protect your cargo and minimise the likelihood of an accident while you're on the road. They're an extremely important safety consideration!

What ratchet straps do SafetyLiftinGear offer?

Our Load Restraint department is home to more than a dozen different ratchet lashing products, all of which are fully tested and certified before sale. Some of these products are supplied with claw hooks, rave hooks or chassis hooks; others are endless. All are made of high-strength polyester webbing, ensuring superb performance across the board.

It's important to always heed the MBS (Minimum Breaking Strength) of the ratchet straps you purchase - this figure represents the weight capacity of the strap, and should not be exceeded under any circumstances. The MBS of our ratchet lashing straps ranges from 500kg to 10 tonnes.

Do SafetyLiftinGear sell any accessories for my ratchet lashing straps?

Yes - we provide wear sleeves and corner protectors to help you protect your ratchet straps and extend their lifespan.

Click here to see our full range of ratchet lashing straps, or give us a call on 0808 123 69 69 for more information on any of our products.

02 Jul 2015

Our Ratchet Straps: A Closer Look

mike Products

We sell a variety of ratchet lashings here at SafetyLiftinGear; today, we're going to take a look at the finer details of the products we offer, helping you to select the right ratchet strap for your requirements.

Materials: Our ratchet straps are made of high-quality, hard-wearing polyester yarn. This makes them very strong and inherently shock absorbent.

Hooks: The majority of our ratchet lashings come with hooks for attachment, and the type of hook varies from product to product. Some have rave hooks, while others have claw hooks or delta links; we also supply several endless ratchet straps with no hooks fitted.
Strength: One of the most important things to look for when purchasing a ratchet lashing is the minimum breaking strength (MBS), which denotes how much force the strap can withstand without snapping. Each of the ratchet straps we sell has a different MBS, ranging from 500kg to 10 tonnes - before making a purchase, please ensure that your chosen product has a suitable MBS for your requirements, as exceeding the minimum breaking strength can be very dangerous.
Length: Our range is very flexible in terms of length - most of our ratchet straps come in several different sizes, so you can select a length that suits your needs. Available lengths range from 4 metres to 20 metres in some cases.
Accessories: In addition to the ratchet straps themselves, we also sell a variety of additional products, including wear sleeves (designed to extend the lifespan of ratchet lashings) and corner protectors (ideal for protecting your straps from sharp corners).

Click here to see our full range of ratchet straps, or watch the video below to see how they are used.