If you have been asked to transport goods, especially heavy goods, you must use the correct load restraints before starting your journey. Using load restraint equipment such as cam buckles and ratchet straps prevents your load from coming loose in transit. Failure to secure your load in the correct manner could result in damaged goods, as well as injuries and possibly fatalities if your unsecured load causes an accident.
If you are transporting your load across continents or simply just moving a loaded pallet by fork lift in a warehouse, regardless of the distance you intend on travelling, ratchet lashings must be used.
It is important to note that, just with any other equipment that is used to transport loads, ratchet straps have their own Working Load Limit (WLL) and their own Minimum Breaking Strength. The break strength is the amounts of weight a ratchet lashing can withstand without breaking. The breaking strength of each component of a ratchet lashing is independently test. But like everything, the ratchet lashing is only as strong as its weakest point, so the part of the ratchet lashing that is the weakest is considered to be the break strength of the entire lashing.
From the Minimum breaking point, the working load limit can be calculated by taking 1/3 off the break strength. So this means that the ratchet lashing with break strength of 300kg has a Working Load Limit of 1000kg.
Remember to check the working load limit of your ratchet lashing before use, to make sure they are able to withstand your load.
How to use ratchet lashings
When you receive your ratchet straps they will require some basic assembly. This can get quite confusing, so we have provided a simple 5 step guide to make sure you have assembled them correctly.
Remember to tie off any excess webbing, and to check that your load is completely restrained and secure before commencing your journey
Here, at SafetyLiftinGear we supply a large variety of Ratchet Lashings, specifically designed to help you transport a variety of loads, and attach to various tie down points. Below are some of our best selling Ratchet Lashings:
Ratchet Lashing with Open Rave Hooks
Rave hooks ratchet lashings are widely used for attaching loads to commercial vehicles or trailers because of their ease of application. This product is available in 3 lengths (6 mtr, 8 mtr and 10 mtr) and has a minimum breaking strength (MBS) of 5 tonnes.This ratchet lashing is trusted by many UK transport companies as it is strong, reliable, shock absorbent and extremely hard wearing.
More Information About this Product >
Closed rave hooks (chassis hooks) are a face and effective way of restraining your load to your commercial vehicle, flatbed lorry or truck. Again, these types of ratchet straps are extremely popular with many UK transport companies because of their ease of application. Simply hook the ratchet lashing to your truck or lorry directly for secure transit.
Here at SafetyLiftinGear, we have a range of ratchet lashings with chassis hooks available, all with different working load limits and different lengths.
Full Range of Ratchet Lashings with Chassis Hooks >
The endless ratchet lashing is a lashing that has no hooks or fixing points. If you are required to secure a load to pallets, racking or you want to secure items together that do not need to be secured down, then an endless ratchet strap is the perfect choice.
These lashings are available in various lengths and Minimal Breaking strengths.
Browse Our Range >
Please ensure that you have selected the appropriate ratchet lashing for the intended job. If you have any questions regarding our range of lashings, then please contact us.
If you find yourself working at height regularly, either on a scaffolding our on roofs, even in manholes, a fall arrest block is an essential piece of equipment designed to help minimise the risk of injury, or worse. If you are working at height without using a fall arrest block, you are putting your own safety, and the safety of others at risk.
Fall arrest blocks comprises of a retractable life line either made from synthetic rope or steel cable. The rope or cable retracts up onto a reel, that is stored within a protected housing, often made out of anti-corrosive metal, but in some cases, like our super lightweight fall arrest blocks or mini blocks, they can be made from plastic.
Each of our fall arrest blocks have a different working length, from 2.2 meters to 2 meters. The working load length is the measurement from the bearing point in the housing, to the bearing point of the hook the rope or cable is fully extended. In the event of a fall, the lifeline is pulled out the housing until it reaches a critical velocity at which point the breaking mechanism activates and the block decelerates to over a short distance, protecting you from falling to the ground.
Here at SafetyLiftinGear we supply a large range of Fall Arrest blocks, including mini fall arrest blocks, today we are going to run through some of the features of our best-selling fall arrest blocks.
Mini Fall Arrest Block
This product is from our specialist mini fall arrest block range, used by workers when they are working at height. This block is designed to be connected to a specialist fall arrest harness.
The G-Force Rolex Mini Block has an almost instant break, so in the event of a fall, the risk of injury is greatly reduced. Unlike the previous models, the lifeline in this unit is made from webbing, and is designed in such a way that it reduces the impact force to less than 6kN.
With a working length of 2.25 meters this mini fall arrest block provides a cost effective solution for many forms of work at height.
Click here for more information on our Mini Fall Arrest Blocks.
Fall Arrest Block with Recovery Winch Facility
This G-Force CRW300 Fall arrest block features a retrieval winch, an easy and effective way to lift a worker who has slipped and fallen to safety. However, when the winch is not engaged the G-Force CRW300 operates as a standard fall arrest block, making it one of our most versatile fall arrest blocks.
The features of this product are really where this product sells itself; this CRW300 is houses in lightweight aluminium alloy housing, making it easy to transport, and store. This product also features a zinc galvanised steel wire rope, available in two lengths (20 and 25 meters). This product also comes with optional brackets which enable you to fit this block directly to the leg of a rescue tripod.
At SafetyLiftinGear, we stock a comprehensive range of Fall Arrest Blocks. In the unlikely chance you are unable to find the specific product you are searching for, don't hesitate to contact us, and a member of our team will happily assist you.
Here at SafetyLiftinGear, we are constantly improving our lines to ensure that they constantly complement each other. We currently supply a wide range of lever hoists, electric hoists, chain hoists, and material lifting equipment to various companies around the UK. Our range of Girder clamps complement these large product lines.
Girder clamps are used when you may require a temporary or semi- permanent hoist anchor point, for overhead lifting or various vertical rigging applications. These diverse girder clamps can also provide solutions for holding and positioning girders whilst being used in construction, as a below the hook device. SafetyLiftinGear’s fully adjustable girder clamps feature a pivoting eye, to attach a hoist with ease, a special clamp jaw design which applies the load away from the flange edge, reducing the stress imposed on the girder flange. You can adjust our girder clamps to fit most Girders by simply by turning the central threaded bar.
Our Girder clamps are extremely robust and are designed to withstand the day to day stress of construction site environments. Before use, make sure you have thoroughly inspected your girder clamps for any damage, if there is any evidence of damage, do not use. Furthermore, you will need to ensure that the supporting structure is adequate for the load that will be imposed as well as making sure that you have selected a girder clamp with the correct working load limit. Working Load Limit is the maximum weight capacity that your Girder clamps can withstand. Overloading your girder clap can cause the clamp to break, and could end up damaging your load, or causing an injury. We clearly state the Working Load limit of our clamps on the product page. Please ensure that when you are purchasing a clamp from Safetyliftingear you have selected the correct clamp for the job.
To view our range of Girder clamps click here. If you have any questions about our products, the please contact us, on 0808 123 69 69 or email sales@safetyliftingear.com
0117 9381 600
