Everyday we read stories about how people are injured while
they were working at height, or we see a story about people who show complete
disregard to health and safety regulations which results in putting themselves
and others in an incredible amount of danger.
It is important that when you are required to work at
height, you do so responsibly, not just for your own safety, but for others
too. By following these 3 safety measures you and other around you will remain
safe:
Fall Arrest Blocks
When you are working at height, it is essential that you are protecting yourself and minimising the risks of slips and falls from height. Fall Arrest blocks are a retractable lifeline, generally made from wire rope, which is stored within a case containing an inertia reel.
In the unfortunate event of a fall, the wire rope is pulled out of the block until it reaches critical velocity, which is when the breaking system locks, preventing you from falling any further. Our Fall arrest blocks all have a shock-absorbing system built in preventing you from getting hurt.
Here at SafetyLiftinGear, we sell a variety of Fall Arrest blocks, so when you are purchasing, please ensure you have selected the correct Block for the required task.
Click here to view all of our fall arrest blocks
Safety Harnesses
When you are working at height, a safety harness most be worn at all times. We know that they are not the most fashionable of accessories, but they are lifesaving.
If you are working at height, make sure that you are using a harness attached to one of the fall arrest blocks we mentioned above. This will protect you from injury in the off chance you fall whilst working at height.
Here at SafetyLiftinGear we sell a huge variety of safety harnesses, from the basic fall arrest harnesses, through to the more specialist, multipurpose harnesses, insulated harnesses and flame resistant harnesses.
Click here to view our full range of safety harnesses
Dropping your tools from a height can have some dire consequences. Firstly, You could end up damaging any equipment or machines that are directly below where you are working, which could end up with some costly repairs for your company. Secondly, you could end up damaging your tool, rendering it useless so you will have to pay to get it replaced. Thirdly, and most importantly, you could end up fatally injuring a member of the public or a workmate.
To prevent creating a hazard it is essential that you use a Tool Lanyard. We supply a huge range of top quality tool lanyards.
Keep your spanner close to hand, by using our specialist wrist lanyards, Keep Loosing your hard hat? Why not attach it to your work belt with our elastic hard hat lanyard and buckle? Using a power tool? use the ERGODYNE Power Tool Trap! Whatever your requirements, we are confident that we have a suitable lanyard for you!
Click here to view our full range.
We pride ourselves on the fact that we stock a truly comprehensive range of Fall protection equipment. However in the event that you cannot find the exact item you are looking for, please contact us on 0808 123 69 69 or email sale@safetyliftingear.com to talk to a member of our customer service team.
available on orders over £100 inc VAT
0117 9381 600
