The main advantage of an adjustable beam clamp is the fact that in can be securely fastened to steel girders and beams without any drilling or welding.

How, you ask? Well, it's quite simple. If you purchase a beam clamp from SafetyLiftinGear, it will have an adjusting bar threaded through the centre. This bar can be turned to adjust the width of your clamp; all you have to do is make the clamp wide enough to fit your beam/girder, then tighten the adjusting bar to ensure that clamp is securely attached.

Once the clamp has been applied, you'll be able to use it for a variety of different lifting tasks. Attaching your clamp to a lifting device will allow you to position the beam or girder to which you've clamped it; alternatively, you could attach your clamp to a pre-existing structure, hang a hoist from the clamp, and then use this system to lift other loads.

The clamps that we sell have maximum weight capacities ranging from 1 to 10 tonnes; click here to see the full range and purchase your beam clamp online.

The main advantage of an adjustable beam clamp is the fact that in can be securely fastened to steel girders and beams without any drilling or welding.

How, you ask? Well, it's quite simple. If you purchase a beam clamp from SafetyLiftinGear, it will have an adjusting bar threaded through the centre. This bar can be turned to adjust the width of your clamp; all you have to do is make the clamp wide enough to fit your beam/girder, then tighten the adjusting bar to ensure that clamp is securely attached.

Once the clamp has been applied, you'll be able to use it for a variety of different lifting tasks. Attaching your clamp to a lifting device will allow you to position the beam or girder to which you've clamped it; alternatively, you could attach your clamp to a pre-existing structure, hang a hoist from the clamp, and then use this system to lift other loads.

The clamps that we sell have maximum weight capacities ranging from 1 to 10 tonnes; click here to see the full range and purchase your beam clamp online.

You might be surprised by the sheer variety of customers we cater to here at SafetyLiftinGear. Naturally, we take a lot of orders from the construction industry, but building sites are far from the only places where SLG products can be found!

Our heavy-duty garden carts are an excellent example of this. They are designed to carry heavy loads over uneven terrain, and while they obviously have their uses on construction sites (e.g. moving bricks, tools, and other equipment from A to B), these uses are just the tip of the iceberg. Here are three other places where our garden carts do their share of heavy lifting:

• Gardens and garden centres. As the name suggests, our garden carts are perfectly suited to garden work. Our dump cart is particularly handy for moving garden waste and compost around.
  
  
• Farms. We frequently supply garden carts to the agricultural sector - the long-handled design of our utility carts makes them far easier for farmers to use than traditional wheelbarrows (largely because you don't have to lift up our carts to move them around!)
  
  
• Music festivals. Our garden carts start to look a lot more trendy when you realise that they've been used to help some of the UK's biggest musical festivals to run smoothly! A lot of work goes on behind the scenes of your favourite festival, and SLG's LoadSurfer carts make it that much easier to move everything around.

Click here to see more of SafetyLiftinGear's garden carts.

You might be surprised by the sheer variety of customers we cater to here at SafetyLiftinGear. Naturally, we take a lot of orders from the construction industry, but building sites are far from the only places where SLG products can be found!

Our heavy-duty garden carts are an excellent example of this. They are designed to carry heavy loads over uneven terrain, and while they obviously have their uses on construction sites (e.g. moving bricks, tools, and other equipment from A to B), these uses are just the tip of the iceberg. Here are three other places where our garden carts do their share of heavy lifting:

• Gardens and garden centres. As the name suggests, our garden carts are perfectly suited to garden work. Our dump cart is particularly handy for moving garden waste and compost around.
  
  
• Farms. We frequently supply garden carts to the agricultural sector - the long-handled design of our utility carts makes them far easier for farmers to use than traditional wheelbarrows (largely because you don't have to lift up our carts to move them around!)
  
  
• Music festivals. Our garden carts start to look a lot more trendy when you realise that they've been used to help some of the UK's biggest musical festivals to run smoothly! A lot of work goes on behind the scenes of your favourite festival, and SLG's LoadSurfer carts make it that much easier to move everything around.

Click here to see more of SafetyLiftinGear's garden carts.

There are numerous different ways to lift a heavy load, but chain slings tend to be the weapon of choice in high-temperature environments and other challenging conditions. Our lifting chains are extremely heavy-duty, and suitable for use in a variety of different environments, from construction sites to factories and warehouses.

There are lots of different products in SafetyLiftinGear's Chains & Rigging section - here's a quick guide to each of them:

• Chain Slings: These sturdy chains come with heavy-duty hooks for each attachment. Weight capacities for 1 leg slings range from 1.5 to 8 tonnes; however, we also sell...
  
  
• 2 Leg Chain Slings: These slings have two chains and two hooks. Our strongest 2 leg sling has a maximum weight capacity of just over 11 tonnes.
  
  
• 4 Leg Chain Slings: These premium chain slings have four hooks and are capable of lifting even heavier loads (max. capacities range from 3.15 tonnes to 17 tonnes).
  
  
• Wire Rope Slings: Made of galvanised wire rope, these cost-effective slings are a good choice for smaller loads (up to around 5,000kg).

We also sell a range of accessories to complement our lifting chains, including an assortment of hooks, eyebolts, plates, and more. Click here to see our full range, or call 0808 123 69 69 for further information.

There are numerous different ways to lift a heavy load, but chain slings tend to be the weapon of choice in high-temperature environments and other challenging conditions. Our lifting chains are extremely heavy-duty, and suitable for use in a variety of different environments, from construction sites to factories and warehouses.

There are lots of different products in SafetyLiftinGear's Chains & Rigging section - here's a quick guide to each of them:

• Chain Slings: These sturdy chains come with heavy-duty hooks for each attachment. Weight capacities for 1 leg slings range from 1.5 to 8 tonnes; however, we also sell...
  
  
• 2 Leg Chain Slings: These slings have two chains and two hooks. Our strongest 2 leg sling has a maximum weight capacity of just over 11 tonnes.
  
  
• 4 Leg Chain Slings: These premium chain slings have four hooks and are capable of lifting even heavier loads (max. capacities range from 3.15 tonnes to 17 tonnes).
  
  
• Wire Rope Slings: Made of galvanised wire rope, these cost-effective slings are a good choice for smaller loads (up to around 5,000kg).

We also sell a range of accessories to complement our lifting chains, including an assortment of hooks, eyebolts, plates, and more. Click here to see our full range, or call 0808 123 69 69 for further information.

First of all, let's clarify the difference between hydraulic jacks and other types of jack. You may well have a jack in the boot of your car, but this is probably a man-powered device, designed to lift your vehicle in the event of a breakdown or emergency.

Hydraulic jacks, on the other hand, tend to be found in more industrial environments, such as garages and workshops. These heavier-duty products, while still primarily used on cars and other vehicles, have a far wider range of uses than standard mechanical jacks - for example, hydraulic jacks are sometimes used to lift building foundations during construction projects.

But how do hydraulic jacks work?

Some of the hydraulic jacks that we sell here at SLG can lift loads of 30 tonnes or more - clearly, this kind of lifting power would be difficult to produce with sheer manpower!

So how do the jacks do it? There's a lot of complicated scientific theory behind hydraulics, but here's a simplified explanation:

• Inside the jack's hydraulic cylinder, powered pumps apply pressure to a reservoir of oil.
  
  
• Because liquids cannot be compressed, the oil is pushed through the cylinder and into a larger chamber.
  
  
• Thanks to Pascal's Law (we told you there was a lot of science behind this stuff!), the pressure in the wide chamber remains the same as it was in the narrow one. This pressure is what forces the jack - and, by extension, whatever you're using the jack to lift - upwards.

Does that make sense? This is an extreme simplification, of course, and different types of hydraulic jack (bottle jacks, cylinder jacks, etc.) work in slightly different ways. Still, this should give you a rough answer to your question!