All posts tagged working at height

13Apr2016

Height Safety Breaches Lead to Fines, and Even Jail Sentences!

mike health & safety

As our regular followers will know, we often write about the vital necessity of height safety measures, particularly in the workplace. We do this to remind employers and workers about the importance of abiding by the correct height safety regulations, by conducting through risk assessments, following best practice guidelines, and using the correct equipment.

Sadly, however, it seems to make little difference how often this issue is discussed either by ourselves, or by other safety professionals. Without fail, a new case of neglected height safety seems to rear its ugly head almost every week. Recently, two news stories came to our attention, both of which had serious consequences for both the workers and the companies employing them. Here's what went wrong, and what the consequences were:

The first case involves a roofing firm in Worcester, who were fined £66,000 after an employee was seriously injured at work. Whilst replacing a fragile roof in April of last year, the worker fell through a skylight and broke his wrist. After an investigation by the HSE was conducted, they found that this accident was a result of the company's failure to implement proper fall protection measures. If edge protection, nets and guardrails had been provided, the risk to the individual and other employees would have been significantly reduced.

In the second case, two construction bosses were sentenced to eight months in prison, and were ordered to pay a £90,000 fine along with £45,000 in court costs, following a worker fatality back in 2014. The incident occurred while C Smith and Sons were dismantling a building set for demolition, which required workers to operate at height. Following one near-miss, and an incident which left a 47 year old man with a fractured spine, pelvis, leg, heel and wrist, work was shockingly allowed to continue. Just hours after his co-worker was injured and only a day after one close call, Paul Harrower fell through a skylight, and died of serious head injuries.

Both of these incidents could have been prevented by the implementation of proper health and safety measures, which would have helped to save the lives and livelihoods of all those involved. Incidents like these can damage reputations and wreck lives, for the victims and their families, as well as those who are responsible. If you conduct operations at height, please take note of these regularly occurring tragedies, and avoid the same thing happening to you! Set the correct measures, follow them, and always use the correct equipment!

For all the latest H&S news and advice, follow us on Twitter.

22Sep2015

Prevent Serious Safety Failings

mike health & safety

As we have mentioned time and time again, working at height is very dangerous, and failing to follow the proper guidelines and safety precautions can and will get people hurt.

If you do not take the necessary precautions when working at height, the Health & Safety Executive may visit your site to ensure that you are following the law. This is what happened to a scaffolding company in London recently; a passer-by was so concerned about the working conditions of the company’s employees and the safety of the public that she raised her concern with the HSE.

The HSE visited the site and found that the scaffolding was poorly erected and there was a lack of safety precautions put in place to prevent objects from falling to the street below. The HSE served a notice to stop all work on this unsafe construction until it was deemed safe. It is stated in the Work at Height Regulations 2005 that "every employer shall take suitable and sufficient measures to prevent, so far as is reasonably practicable, any person falling a distance liable to cause personal injury." (6.3)

Time and time again, we see that employers and even employees are not taking the correct safety precautions to protect themselves from harm. Over 60% of deaths during work at height involve falls, but by wearing a harness and using anchors and fall arrest blocks, these accidents are easily prevented and people’s lives are saved.

Another important point made above is the safety of the general public when you are working at height. The Work at Height Regulations also states "every employer shall, where necessary to prevent injury to any person and to take suitable and sufficient steps to prevent, so far as is reasonably practicable, the fall of any material or object." (10. 1)

When working on scaffolding, it is important to have nets around the scaffolding to catch any objects that fall from it. You can also protect people by simply attaching your tools to a lanyard. This simple precaution can help save lives (and your tools!)

Thankfully, the malpractices of the London scaffolding company did not end up causing any serious injuries or any harm to passers-by. However, the company’s owner did get receive a fine and a suspended prison sentence.

Visit SafetyLiftinGear’s Height Safety department and make sure you have all the safety equipment you need.

27Aug2015

New: 15m Fall Arrest Block & Recovery Winch

adam products

As you've probably noticed, we're constantly adding new products to our catalogue here at SafetyLiftinGear. Technology is constantly moving forward, and we are keen to ensure that we stay ahead of the pack at every turn. As far as we're concerned, nothing but the latest, most reliable, most cutting-edge equipment will do!

The latest addition to our range is this 15m Fall Arrest Block, which can now be found in our Height Safety department:

Not only is this sturdy fall arrest block extremely well-suited to working at height, it comes with a built-in recovery winch facility that allows you to be winched up or lowered down safely in the event of a fall. The recovery winch is easy to operate, and when it's not in use, the product functions just like any of our other high-calibre fall arrest blocks.

Here's a little more information about the new product:

Our 15m fall arrest block comes with a 2 year warranty as standard. It is suitable for a working at height in a wide variety of environments, including:

Construction sites
Scaffolds
Roofs
Bridges
Confined spaces

If you require a fall arrest block with a longer working length, we also offer a 20/25m version of this product, which also includes a recovery winch facility and comes with a 2 year warranty.

Click here to browse SafetyLiftinGear's full range of height safety gear, or give us a call on 0808 123 69 69 to discuss your requirements with a member of our customer service team.

29Jul2015

Working at Height: The Three Ts

mike health & safety

Yesterday, we told you all about our new Ergodyne tool lanyards; today, we'd like to show you a video that Ergodyne made to promote their products and encourage people to stay safe whilst working at height:

The video above is all about what Ergodyne call 'The Three Ts': Tethering, Topping, and Tagging. Don't worry if you haven't the time to watch the whole thing - here are The Three Ts in a nutshell:

The Three Ts of Height Safety

The following considerations are absolutely critical for anyone who works at height:

Tethering. This means ensuring that your tools are securely tethered, either to your person or to a secure fixing that will not allow them to fall. This is what SafetyLiftinGear's tool lanyards are for.
Topping. When working at height, do you carry tools, fittings, or other equipment in a work bag? If so, you need to make sure that the bag in question is properly topped; ask yourself what will stop your equipment from falling out if the bag is upturned or inverted, and if the answer is 'nothing', consider buying yourself a new, safer tool bag.

As these unfortunate watermelons found out, even small items (such as nuts and bolts) can do a lot of damage when dropped from height!

Tagging. The third and final 'T' refers to the proper labelling of tool lanyards and other height safety products. Such items should always be clearly marked to identify the weight capacity of the product in question - exceeding the stated weight capacity can be very dangerous, and clear tagging/labelling ensures that workers will be able check the maximum capacity of their equipment at a glance.

Click here for more information about working at height, or visit SafetyLiftinGear's Height Safety section to find out how we can help you to stay safe at work.

08Jul2015

Working at Height: Your Questions Answered

mike health & safety

Working at height

If you and/or your employees work at height, it is crucial to ensure that all work is carried out as safely as possible. Today, we're going to answer some frequently asked questions on the subject of working at height - if you're not sure what's required of you, read on to find out more about height safety and what you should be doing about it:

What counts as 'working at height'?

The HSE website defines 'work at height' as any work carried out in "any place where, if there were no precautions in place, a person could fall a distance liable to cause personal injury". You don't have to be a specific distance above the ground before you qualify - if there's a chance you could fall and hurt yourself, you're working at height.

How far can I fall without hurting myself?

Again, there's no objective answer to this question: if you suffer a fall, the severity of your injuries will depend on your age, your weight, the surface on which you land, the way in which you land, and dozens of other factors besides the exact height you fell from. People have been known to survive falls from several kilometres high; conversely, people have been seriously injured and even killed by falls of a few feet or even less. This is why there is no specified limit to what constitutes 'working at height' - even the smallest of falls can be catastrophic!

What precautions are legally required when working at height?

We answered this question last month - the Work at Height Regulations 2005 don't specify any particular equipment or required safety measures, but they do state the need for "sufficient work equipment" and a proper assessment of any height safety risks. It's basically up to you to decide what precautions and which pieces of equipment will best protect you and your workers, but you won't get away with not doing anything.

What should I use to protect my workers?

Your main aim when selecting height safety equipment should be to prevent a fall from occurring. This can be achieved with safety harnesses and fall arrest blocks. Some kind of edge protection system can also help to minimise the risk of an accident. Otherwise, height safety generally depends on common sense - see our height safety fails blog for some examples of what not to do.

Need some height safety equipment? Visit our Working at Height department.

Get in touch to learn more about our training courses!