Author: mike

15 Sep 2015

Need Bespoke Lifting Equipment? We Can Help!

mike Products

Perhaps the single most important thing to bear in mind when you're shopping for lifting equipment is that each and every product has its own WLL (Weight Load Limit). Whether you're purchasing a chain sling, an electric hoist, or some other form of lifting gear, it's absolutely crucial to check the WLL, as this tells you the maximum weight you'll safely be able to lift using the item in question. If you need to transport a load weighing 5 tonnes, each piece of lifting equipment that you use to do so must have a weight load limit of AT LEAST 5 tonnes. Exceeding the WLL of your lifting gear may cause it fail, which can obviously cause a lot of damage.

But what if I can't find any lifting equipment with a high enough weight load limit?

If you're planning to lift a particularly heavy load, you may struggle to find equipment that's capable of safely supporting that much weight. Those who visit our 4 Leg Chain Sling department, for example, may initially think we only provide slings for weights of up to 17 tonnes.

But 17 tonnes is merely the highest weight load limit available in our standard range. We're actually capable of supplying chain slings (and many other lifting products) that are suitable for much heavier loads - it's just that these products are made-to-order, so you'll have to get in touch with us directly.

If your project is too big for our standard range of lifting gear, we encourage you to contact us and discuss your requirements with a member of the SafetyLiftinGear team. We have providing lifting equipment for a huge variety of large and/or unusual briefs in the past, and we'd be more than happy to provide a bespoke solution to suit your needs.

15 Sep 2015

Need Bespoke Lifting Equipment? We Can Help!

mike Products

Perhaps the single most important thing to bear in mind when you're shopping for lifting equipment is that each and every product has its own WLL (Weight Load Limit). Whether you're purchasing a chain sling, an electric hoist, or some other form of lifting gear, it's absolutely crucial to check the WLL, as this tells you the maximum weight you'll safely be able to lift using the item in question. If you need to transport a load weighing 5 tonnes, each piece of lifting equipment that you use to do so must have a weight load limit of AT LEAST 5 tonnes. Exceeding the WLL of your lifting gear may cause it fail, which can obviously cause a lot of damage.

But what if I can't find any lifting equipment with a high enough weight load limit?

If you're planning to lift a particularly heavy load, you may struggle to find equipment that's capable of safely supporting that much weight. Those who visit our 4 Leg Chain Sling department, for example, may initially think we only provide slings for weights of up to 17 tonnes.

But 17 tonnes is merely the highest weight load limit available in our standard range. We're actually capable of supplying chain slings (and many other lifting products) that are suitable for much heavier loads - it's just that these products are made-to-order, so you'll have to get in touch with us directly.

If your project is too big for our standard range of lifting gear, we encourage you to contact us and discuss your requirements with a member of the SafetyLiftinGear team. We have providing lifting equipment for a huge variety of large and/or unusual briefs in the past, and we'd be more than happy to provide a bespoke solution to suit your needs.

10 Sep 2015

When Load Restraint Goes Wrong

mike Health & Safety

Before you hit the road, you should always use the appropriate load restraint equipment to ensure that whatever you're carrying stays put for the duration of the journey. This is particularly important for heavy loads, of course, but it applies to loads of all sizes over journeys of any length. Whether you're hauling a tonne of bricks from Land's End to John O'Groats or simply forklifting a few pallets to the other end of the warehouse, securing the load should always be your top priority.

Otherwise, you might end up like the motorists in these videos...

1. Shelves come loose from trailer

Everything seems fine in the first 15 seconds of this video...but then the flimsy length of tape that was barely keeping those shelves on the trailer broke, and it all went rather wrong. Again, kudos to the motorist who filmed this - not everyone would be able to get out of harm's way that quickly!

2. Boxes take a high-speed tumble

The text at the start of this video tells us that the camera's owner was doing 100 kph (roughly 62mph) when their fellow motorist lost their load, and this really illustrates the importance of using the right load restraint equipment. If your car hits something at more than 60mph, it doesn't really matter what that something is - it's going to do a lot of damage!

3. Mattresses go flying

We're not entirely sure how those two mattresses ended up in mid-air, but we're almost certain it could have been prevented if the owner had strapped them down properly!

4. Huge crate slides off lorry

Okay, now we're just lost for words. Do these people not think to secure their loads at all? Do they think that everything will just magically stay put?

If you don't want your load to end up on YouTube, make sure you secure it with the correct load restraint equipment. It will prevent damage and - more importantly - save lives!

10 Sep 2015

When Load Restraint Goes Wrong

mike Health & Safety

Before you hit the road, you should always use the appropriate load restraint equipment to ensure that whatever you're carrying stays put for the duration of the journey. This is particularly important for heavy loads, of course, but it applies to loads of all sizes over journeys of any length. Whether you're hauling a tonne of bricks from Land's End to John O'Groats or simply forklifting a few pallets to the other end of the warehouse, securing the load should always be your top priority.

Otherwise, you might end up like the motorists in these videos...

1. Shelves come loose from trailer

Everything seems fine in the first 15 seconds of this video...but then the flimsy length of tape that was barely keeping those shelves on the trailer broke, and it all went rather wrong. Again, kudos to the motorist who filmed this - not everyone would be able to get out of harm's way that quickly!

2. Boxes take a high-speed tumble

The text at the start of this video tells us that the camera's owner was doing 100 kph (roughly 62mph) when their fellow motorist lost their load, and this really illustrates the importance of using the right load restraint equipment. If your car hits something at more than 60mph, it doesn't really matter what that something is - it's going to do a lot of damage!

3. Mattresses go flying

We're not entirely sure how those two mattresses ended up in mid-air, but we're almost certain it could have been prevented if the owner had strapped them down properly!

4. Huge crate slides off lorry

Okay, now we're just lost for words. Do these people not think to secure their loads at all? Do they think that everything will just magically stay put?

If you don't want your load to end up on YouTube, make sure you secure it with the correct load restraint equipment. It will prevent damage and - more importantly - save lives!

07 Sep 2015

New Products: More Ergodyne Work Gear

mike Products

A few weeks back, we introduced you to our new range of tool lanyards from Ergodyne, a Minnesota company renowned for their "tenacious work gear". These lanyards proved very popular indeed, and so it gives us great pleasure to announce that we've just added a whole range of additional Ergodyne products to our Height Safety department!

Here's a quick run-down of our newest additions:

Tie hooks. These are available in small, medium, and large sizes, as well as in a 'double belt' format (medium or large). Ergodyne tie hooks are ideal for storing and organising cables, hoses and cords, as seen in this video:

Tool Tails™. If you're looking for an easy way to attach your tools to your belt whilst working, Tool Tails™ are perfect for the job. They can be used to attach a wide variety of tools and other items; choose from our elastic loop Tool Tails™ and our ultra-strength web Tool Tails™.
Cold shrink traps. Ergodyne's cold shrink traps should be used alongside the Tool Tails™ to trap the tail and keep it secure while in use. If you'd like to see how the cold shrink traps work, watch this video:

Heat tape. This is another method of trapping your Tool Tails™, providing additional security and grip while in use. Here's another video that demonstrates how to use the Ergodyne heat tape trap:

To see SafetyLiftinGear's full range of heavy-duty, user-friendly Ergodyne work gear, please visit our Tool Lanyards department.

25 Aug 2015

Product Focus: Ratchet Lashing Straps

mike Products

SafetyLiftinGear's ratchet lashing straps are widely used by numerous transport companies in the UK and beyond. Rest assured that, if you're transporting a heavy load and you want to make sure it stays put, we can provide the perfect solution.

Why are ratchet straps so important?

Because failure to restrain the load(s) you're transporting can have grave consequences. We've seen many photos of heavy loads that came loose in transit because weren't properly restrained; this results in damaged goods and, worse still, road accidents. According to gov.uk, unrestrained objects falling from vehicles caused a total of 22,000 road impact incidents in Britain over the course of 2013.

Simply put, our ratchet lashing straps help to protect your cargo and minimise the likelihood of an accident while you're on the road. They're an extremely important safety consideration!

What ratchet straps do SafetyLiftinGear offer?

Our Load Restraint department is home to more than a dozen different ratchet lashing products, all of which are fully tested and certified before sale. Some of these products are supplied with claw hooks, rave hooks or chassis hooks; others are endless. All are made of high-strength polyester webbing, ensuring superb performance across the board.

It's important to always heed the MBS (Minimum Breaking Strength) of the ratchet straps you purchase - this figure represents the weight capacity of the strap, and should not be exceeded under any circumstances. The MBS of our ratchet lashing straps ranges from 500kg to 10 tonnes.

Do SafetyLiftinGear sell any accessories for my ratchet lashing straps?

Yes - we provide wear sleeves and corner protectors to help you protect your ratchet straps and extend their lifespan.

How do I use a SafetyLiftinGear ratchet strap?

Our ratchet lashing straps are very easy to use, as this video demonstrates:

Click here to see our full range of ratchet lashing straps, or give us a call on 0808 123 69 69 for more information on any of our products.

25 Aug 2015

Product Focus: Ratchet Lashing Straps

mike Products

SafetyLiftinGear's ratchet lashing straps are widely used by numerous transport companies in the UK and beyond. Rest assured that, if you're transporting a heavy load and you want to make sure it stays put, we can provide the perfect solution.

Why are ratchet straps so important?

Because failure to restrain the load(s) you're transporting can have grave consequences. We've seen many photos of heavy loads that came loose in transit because weren't properly restrained; this results in damaged goods and, worse still, road accidents. According to gov.uk, unrestrained objects falling from vehicles caused a total of 22,000 road impact incidents in Britain over the course of 2013.

Simply put, our ratchet lashing straps help to protect your cargo and minimise the likelihood of an accident while you're on the road. They're an extremely important safety consideration!

What ratchet straps do SafetyLiftinGear offer?

Our Load Restraint department is home to more than a dozen different ratchet lashing products, all of which are fully tested and certified before sale. Some of these products are supplied with claw hooks, rave hooks or chassis hooks; others are endless. All are made of high-strength polyester webbing, ensuring superb performance across the board.

It's important to always heed the MBS (Minimum Breaking Strength) of the ratchet straps you purchase - this figure represents the weight capacity of the strap, and should not be exceeded under any circumstances. The MBS of our ratchet lashing straps ranges from 500kg to 10 tonnes.

Do SafetyLiftinGear sell any accessories for my ratchet lashing straps?

Yes - we provide wear sleeves and corner protectors to help you protect your ratchet straps and extend their lifespan.

Click here to see our full range of ratchet lashing straps, or give us a call on 0808 123 69 69 for more information on any of our products.