Klarna Logoavailable on orders over £100 inc VAT

Hinkley Point Fence Test

 

Did you know that we provide on-site testing services for clients in a range of different industries? Read on to discover what services we offer.

 

What is the meaning of onsite testing?

On-site testing is an umbrella term for all sorts of testing services that happen on-site, meaning the company doing the testing will travel to you. This service is valuable to businesses for lots of reasons, most notably the speed at which they receive the results, saving time and cutting costs.

 

What on-site testing services does SafetyLiftinGear provide?

Here at SafetyLiftinGear, we provide on-site force tests for all kinds of different products and materials for various businesses. Below are some recent examples of the on-site testing we carried out:

 

On-site testing: Case studies

Wind testing fencing at Hinkley Point

We visited Hinkley Point to test the strength of the fencing around the power station. Here we carried out a personnel test (pictured above) and a wind test (below) using a calibrated load cell and our own round slings and lever hoists.

 

Wind testing fencing at Hinkley Point

 

On-site testing for handrail at Bristol airport

The team from our Bristol service centre also paid a visit to Bristol Airport last week, where they carried out on-site testing on a handrail.

 

Onsite testing for handrail at Bristol airport

 

As requested by a contractor, the handrail's resin anchored fixings were tested up to a force of 1.5kN. Strength tests like this are important to ensure the safety of fixtures in what is one of England's busiest international airports.

Contact us now to request a FREE on-site testing quote. Our on-site testing services are carried out by expert technicians who can provide a professional solution for all sorts of different requirements!

READ MORE

Rigging equipment refers to the devices and elements used to lift and manoeuvre objects safely, as part of a planned system implemented by a team of riggers. This encompasses a variety of components which are used to secure and distribute the load in question, in order to facilitate the moving process and ensure that it is completed successfully. Industries which often require the services of rigging equipment include construction, engineering and event staging.

Like all lifting operations, hoisting and rigging should be performed with public and employee safety as a primary focus. In order to comply with health and safety legislation along with industry standards, organisations should carefully consider two following elements:

  1. Operation Planning: Before the lifting applications begin, teams should carefully consider the demands of the lift and conduct a thorough risk assessment. 

  2. Equipment: The first point will dictate how the rigging equipment is selected and used. Riggers must ensure that the overall rigging setup and individual elements are appropriate for the size and weight of the load in question, in order to avoid overloading the equipment, which can lead to damage and serious safety hazards. The rigging equipment itself should also be sourced from reputable suppliers, in order to ensure that the products are of a suitable standard and quality. In order to maintain this quality, the items should then be regularly tested to ensure that it continues to meet safety standards.

What are the different types of rigging equipment?

Wire Rope Slings

Wire rope slings are available in a range of lifting capacities, providing users with a strong and flexible solution for performing lifting operations.

Buy or hire wire rope slings >

 

Polyester Webbing Slings

Our lifting slings are available in a range of different designs and weight specifications.

Buy or hire webbing slings >

 

Chainslings

Chainslings offer a durable lifting solution, which comes with a convenient hook system for easy attachment. Not only do these slings come in a variety of weight limits, they are also available in single, 2 leg and 4 leg designs.

Buy or hire chainslings >

 

Spreader Beams

Spreader beams are a modular lifting solution which are designed to be used in a variety of configurations, depending on the requirements of the lifting operation. These beams can be used with both synthetic lifting slings and wire rope slings.

Buy or hire spreader beams >

 

Click here to view the full selection of rigging equipment that we supply here at SafetyLiftinGear!

READ MORE

When working at heights, there's nothing more daunting than the prospect of dropping your heavy tools to the ground below where they could potentially do serious damage. It is commonplace to wear a safety tool belt that allows workers to carry tools up to a height safely but tool safety lanyards ensure those tools stay safe when using them. This is why tool safety lanyards are so important, and why we have introduced four new TOOL-SAFE safety lanyards to our collection! These lanyards will ensure your tools (and the people below you) will be kept safe while you're working.

Take a look at our new arrivals here:

3kg Coiled Cable Tool Safety Lanyard

3kg Coiled Cable Tool Safety Lanyard

First in our new TOOL-SAFE range, is this 3kg Coiled Cable Tool Safety Lanyard. With the ability to keep tools of up to 3kg safe, this safety lanyard is sure to make working at heights a much safer operation. It's coil design also reduces the length of the lanyard making it more compact.

 

10kg Coiled Cable Tool Safety Lanyard

10kg Coiled Cable Tool Safety Lanyard

If you're working with slightly heavier tools, this 10kg Coiled Cable Tool Safety Lanyard might be just what you're looking for. Compact and strong, much like the 3kg Coiled Cable Tool Safety Lanyard, this TOOL-SAFE lanyard will make sure your tools stay close to you if they slip from your hands.

To browse our full collection of Tool Safety Lanyards just click here! Alternatively, if you have any questions about our new tool-safe safety lanyards you can contact us here.

READ MORE

What is a Toe Jack?

It is often difficult to identify every item in a workshop especially if they look similar to another, which is why it is important to understand the importance of each tool before working in this environment. Today we will be looking at the Toe Jack and what the purpose of this tool is.

What is a toe jack?

toe jack (also known as a floor jack) is a heavy-duty piece of equipment that is designed to lift items with very low or high clearances. Toe jacks are ideal for moving loads that are lower down on the floor, such as heavy machinery. They are available in a variety of different weight capacities too, making them suitable for a wide range of operations.

The 'Toe' is the fork-like part at the front of the Toe Jack which slots underneath the load you wish to lift. Loads can also be lifted by the 'head' part of the Toe Jack, which can sustain even heavier loads from higher clearances. The hydraulic pump is then used to lift the load to the required height and if your Toe Jack includes a swivel feature, this will allow you to place the load in the correct position.

Here at SafetyLiftinGear, we stock Hydraulic Toe Jacks, meaning water pressure is used to lift the loads. Available in both standard and swivel models, you should be able to find a Toe Jack to suit you. Our Toe Jacks are also available to hire if you need one for a single occasion. Simply click the 'Hire me' button and then 'Enquire' at checkout to receive a quote for this rental. 

What is a toe jack used for? 

A Toe Jack is commonly used to lift and lower heavy loads onto moving skates. This operation means heavy loads can be moved around with ease. If it is an exceptionally heavy load, multiple Toe Jacks can be used at once if required. Toe Jacks are most often used to move heavy machinery in a warehouse, but can also be used for operations such as moving furniture too. The varied weight capacity of Toe Jacks means they can be the helping hand you need in a variety of operations.

If this sounds like something that might be useful for you, then feel free to browse our comprehensive range of Hydraulic Toe Jacks. If you have any queries about this product, please do not hesitate to get in touch or call us on 0808 123 69 69. 

READ MORE

confined space

What is a Confined Space?

A confined space is a work area which is considered to be partially or substantially enclosed, restricting movement. In many cases, confined spaces will also present restrictions in terms of entry and exit, increasing health and safety risks for workers who perform operations in these areas.

Confined spaces are often defined as areas that are:

  • Enclosed on all sides
  • Small/Difficult to work in
  • Hard to get out of

However, a place not usually fitting this description may become a confined space if the conditions change, for example, if the level of oxygen is reduced or there is water present. This may also apply if the area is used to store specific items such as gas cylinders, which would present a risk to the surrounding atmosphere if discharged.

Work Areas Commonly Defined as Confined Spaces Include:

  • Tunnels
  • Pipelines
  • Manholes 
  • Silos
  • Tanks
  • Pits
  • Sewers
  • Trenches
  • Storage Bins
  • Ductwork
  • Shafts 
  • Building Voids

What Does the Law Say About Confined Spaces?

Under the Health and Safety at Work Act 1974, employers must ensure the safety of their workers and others, a duty which is regulated in further detail by the Confined Spaces Regulations 1997. These regulations require the employer to avoid confined space entry where possible, following safe working systems in cases where the work is unavoidable. If confined space work is being conducted, employers must ensure that emergency arrangements are put in place before commencing operations.

In addition to the specific requirements of working in confined spaces, regulations for managing health and safety at work (1999) also require employers/self employed individuals to carry our a thorough risk assessment of the area, in order to accurately identify which measures need to be taken in order to prevent injuries. This may result in the need to manage certain hazards by using specialised equipment such as safety barriers and harnesses.

What Hazards do Confined Spaces Present?

One or more of the following risks must be present or reasonably foreseeable for the area to be defined as a confined space:

  • Reduced oxygen 
  • Fire and explosions 
  • Harmful gases, fumes and vapours 
  • Solid or liquid materials flowing into the space
  • Increased temperatures 

 When is a Confined Space not Defined as a Confined Space?

If an enclosed space does not present one of the specific risks outlined by the regulations, it may not be defined as a confined space, but will be subject to other relevant regulations relating to workplace health and safety.

For more health and safety news and advice, follow us on Twitter!

READ MORE

Does your job require you to manage extremely long cables? Are you finding it hard to manage them all at once? If only there was something to make your job a whole lot easier - oh wait there is! Here at SafetyLiftingGear.com we have a terrific range of Cable Grips that are used for gripping, pulling, and tensioning all forms of unsheathed wire ropes, cables, and metal rods.

Our cable grips provide a firm, non-slip grip thanks to their parallel jaws, and won't cause any damage to the wire. The spring-loaded guide prevents the cable grip from dropping off the wire and allows instant release without causing the cable to jam. We sell a range of cable grips to suit a range of cable sizes and tensile strengths and they come in pulling forces of 2000, 3000, and 5000 daN. 

If you're interested in purchasing a cable grip or you're looking for more information about the cable grips that we offer, you can view our great selection by clicking here. We also sell a range of Cable Jack and Spindles that will also help you to maintain your cables and will enable you to coil and uncoil your cables with ease. To view our entire range of cable-handling equipment, click the button below.

Cable Handling Equipment >

If you have any questions regarding our Cable Grips, please do not hesitate to contact us - we'd be more than happy to help. Alternatively, you can learn more about our cable-handling equipment by checking out the resources below.

Read More:

- Cable Handling Products from SLG!

READ MORE

With the weather heating up, it's starting to look more and more like summer here in the UK. While this is a welcome prospect for most, it also brings a variety of possible safety hazards with it, many of which will impact individuals in the workplace. In order to combat these additional risks, it's important for managers and employees to prepare themselves accordingly, by following these important safety tips:

Plan & Prepare for Warm Weather if You Work Outdoors

Outdoor workers are particularly vulnerable during warmer weather, due to their enhanced exposure to the sun, along with the variety of additional hazards that may present themselves. In order to ensure that the sun and additional heat do not lead to health and safety risks for workers and members of the public, it is highly important to ensure that businesses thoroughly prepare for these conditions and act accordingly. In many cases, this may mean going beyond the usual health and safety measures; putting additional ones in place to address these risks. This can range from ensuring that workers are wearing sunscreen, to altering the way in which work operations are completed, for example: planning strenuous operations for cooler times of the day when the sun is not at its highest point. 

Dress Appropriately For Warmer Conditions

Wearing the correct clothing is always an important safety measure for working adults, but this becomes even more important in hot weather, which presents several complications and potential risks. For most professions this simply means dressing in loose-fitting, breathable clothing that will keep you cool, without presenting any additional risk (e.g. causing trips, becoming caught in machinery). This is even more important for outdoor workers, due to their direct exposure to the sun and heat, along with the need for additional protective clothing and equipment. Workers must therefore be provided with clothing and equipment that not only protects them from exposure to the sun, but also remains breathable in order to avoid overheating. Companies should also ensure that PPE fits in with these seasonal requirements, offering the highest level of safety without compromising other operations requirements.

Stay Hydrated 

This is a simple but important tip for all workers, and especially for those who are performing strenuous operations which cause them to sweat. To avoid the risk of dehydration, ensure that you are drinking enough water throughout the day, keeping in mind that your requirements will rise along with the temperature. If you're going to consume additional beverages, opt for something like a spots drink that will replenish your electrolytes, or even make your own.

Make Sure Workplace Temperatures are Safe

If heat levels in your workplace become dangerous, it is highly important for you to respond accordingly. For outdoor workers, this means assessing conditions before stating your operation, while also taking regular breaks in cool areas to avoid over exposure to the sun. For those working indoors, every measure should be taken to ensure that work areas are kept well ventilated and cool, to avoid temperatures reaching dangerous levels. You may need to invest in air conditioning equipment, or even send workers home if conditions become unsuitable and potentially threatening.

Pay Attention to Additional Hazards

Sun and heat also means that it is important to remain alert to additional hazards that may present themselves. For road workers, this means dealing with poor visibility on the road due to glaring sunlight, along with a range of other issues, including the possibility of encountering children playing in the streets during the summer break from school. It is therefore even more important to ensure that the correct signs and protective measures are put in place before commencing work, to ensure that every possible step has been taken to protect both the workers and the public. It is also important for all workers to remain alert to the signs of heat related illness, in both themselves and their fellow workers. Advice on spotting heat exhaustion and heatstroke can be found on the NHS website.

 

READ MORE

Get in touch to learn more about our training courses!

First Name *
Surname *
Telephone Number *
E-mail address *
Ask A Question *
 
Security Character Security Character Security Character Security Character Security Character Security Character
Enter Letters (No Spaces) *